MonelK500

  • The MonelK500 provided by Wenzhou Taixin Stainless Steel Co.,Limited enjoys a good reputation in the international market.We welcome you place trial order to test our quality.

  • If you are planning to buy monelK500 from professional monelK500 manufacturers suppliers in China, please feel free to contact Wenzhou Taixin Stainless Steel Co.,Ltd, equipped with productive factory, we are always at your service.

 

 

Monel K500 material is a nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F.

Chemical Composition, %

Ni

Cu

Al

Ti

C

Mn

Fe

S

Si

63.0-70.0

Remainder

2.30-3.15

.35-.85

.25 max

1.5 max

2.0 max

.01 max

.50 max

 

Monel500 is an extremely combination property that use for largest amount and most widely corrosion resistance alloy. This alloy in the hydrofluoric acid and fluoride gas medium with excellent corrosion resistance, as well as to the hot concentrated alkali. At the same time, is also corrosion resistant to neutral solution, sea water, air, organic compounds. An important feature of this is generally do not generate a stress corrosion cracking, good cutting performance.


Monel K500 alloy in the fluoride gas, hydrochloric acid, sulfuric acid, hydrofluoric acid and their derivatives have a very good corrosion resistance property, and possess better corrosion resistance more than the copper alloy in the sea water. Acid medium: Monel 500 have corrosion resistance in less than 85% consistency of sulfuric acid. Monel 500 is an important material that resistant to hydrofluoric acid. Water corrosion: Monel 400 alloy in most corrosion cases of water, not only excellent corrosion resistance, but also less pitting, stress corrosion, the corrosion rate less than 0.025mm / a. High temperature corrosion: Monel 500 for the work of the highest temperature at about 600 °C in general in the air, in the high temperature steam, the corrosion rate less than 0.026mm / a. Ammonia: Monel 500 can be resistant to an hydrous ammonia and aminate conditions corrosion below 585 °C due to the high nickel. 

 

 

Monel K500 alloy is a multi-purpose material in many industrial applications: 
1. Seamless water pipe in the power factory
2. Sea-water exchanger and evaporator 
3. Sulfuric acid and hydrochloric acid environment 
4. Crude distillation 
5. Sea-water in the use of equipment and propeller shaft 
6. Nuclear industry and used in the manufacture of uranium enrichment isotope separation equipment 
7. Manufacturing hydrochloric acid equipment used in the production of pump and valve

Packing:

All our products are packed, stored, transported according to the international regulation. The products are wrapped with anti-rust paper and steel rings to prevent damage. Identification labels are tagged according to standard specification or customer's instructions. Special packing is available as per customer's requirement.Ply wooden box are available for special protection. Other kinds of packing can be offered if request.

 

 

 

 

Related Products:>>