InconelX-750

  • The InconelX-750 provided by Wenzhou Taixin Stainless Steel Co.,Limited enjoys a good reputation in the international market.We welcome you place trial order to test our quality.

 

  • If you are planning to buy InconelX-750 China from professional InconelX-750 manufacturers China and suppliers China, please feel free to contact Wenzhou Taixin Stainless Steel Co.,Ltd, equipped with productive factory, we are always at your service.

 

 

GB/TUNSTrademarkJISW.Nr
GHH4145N07750InconelX-750NCF750B2.4669
Chemical Composition:
Grade%NiCrFeNbCoC
InconelX-750MinRest1450.7
Max1791.210.08
MnSiSCuAlTiP
0.42.25
10.50.010.512.750.02
Physical Performance:
Density8.25 g/cm³
Smelt Point1395-1425
H*TT*SY*SElHardness
Rm N/mm2RP0.2N/mm2A5 %HB
Solution91055025≤350


 

 Inconel X-750  

UNS

Trademark

JIS

W.Nr

N07750

InconelX-750

NCF750B

2.4669

Inconel X-750 Chemical composition: 

Alloy

%

Ni

Cr

Fe

Nb

Co

C

Mn

Si

S

Cu

Al

Ti

P

Inconel X-750

Min.

Balance

14

5.0

0.7

0.4

2.25

Max.

17

9.0

1.2

1.00

0.08

1.00

0.5

0.01

0.5

1.0

2.75

0.02

 Inconel X-750 Physical properties: 

Density

8.25 g/cm3

Melting range

1395-1425°C

Inconel X-750 Alloy m inimum Mechanical properties in normal temperature:

Alloy

Tensile strength Rm N/mm²

Yield strength RP0.2 N/mm²

Elongation A5 %

Brinell hardness    HB

Solution treatment

910

550

25

≤350

Inconel X-750 Characteristic as below:
Inconel X-750 is a precipitation-hardenable alloy which has been used in applications such as high temperature structural members for gas turbines, jet engine parts, nuclear power plant applications, heat-treating fixtures, forming tools, and extrusion dies. The alloy is highly resistant to chemical corrosion and oxidation and has high stress-rupture strength and low creep rates under high stresses at temperatures up to 1500°F (816°C) after suitable heat treatment.

 

Inconel X-750 Machinability:

Conventional machining techniques used for iron based alloys may be used. This alloy does work-harden during machining and has higher strength and "gumminess" not typical of steels. Heavy duty machining equipment and tooling should be used to minimize chatter or work-hardening of the alloy ahead of the cutting.

 

Inconel X-750 Corrosion resistance:
Inconel X-750 has excellent resistance to chloride ion stress-corrosion cracking. It exhibits satisfactory resistance to numerous oxidizing environments. The alloy has similar corrosion resistance to alloy 600 in many media.

 

Incoloy X-750 Application range and field:

Nuclear reactors

Gas turbines

Rocket engines

Pressure vessels

 

Packing:

All our products are packed, stored, transported according to the international regulation. The products are wrapped with anti-rust paper and steel rings to prevent damage. Identification labels are tagged according to standard specification or customer's instructions. Special packing is available as per customer's requirement.Ply wooden box are available for special protection. Other kinds of packing can be offered if request.